|
NW KS | I'm not sure what the ideal response time might be for agopengps with the automated turning. I know I read some of the electric motor choices could be a little to slow for good uturn performance. I would make sure you understand all your settings before buying or changing anything. I asked about wheel lock times because the diagnostics and calibrations for the NavII seemed to be pointing me in that direction but I wasn't sure. I have setup a couple of Reichhardt systems in combines and I know they wanted slower lock to lock times. Different system and different machine through. Warm oil is the key to any calibrations or adjustments with hydraulic valves. Can you get uturn to work ok at a slower speed say 2-3 mph? | |
|
Steering Valve Lock to Lock time trimble AP
