|
| Thanks for the reply. There are settings for the max pwm value. I have it set to 100% pwm max, so I am getting full flow. Yes, the over shoot is less the slower I travel. I did just have delivered a higher flow valve cartridge that fits in my existing valve block. I'll put it in and try it. I'll have to see what the trade offs are. The lower flow valve seems to make it very easy for the system to make minor corrections and follow the line. I'll have to see if the larger valve leaves me with a trade off for straight line performance. I'd rather have arrow straight lines as opposed to nice u-turns if I had to pick one or the other. Hopefully the larger valve will do both well. | |
|
Steering Valve Lock to Lock time trimble AP
