|
Minnesota | It's very easy to get GPS out of the NAV controller. You just need an adapter cable and enable it through the pro700.
REMEMBER that the GPS position that it sends to your Ag Leader will be in relation to the center of the rear axle and NOT the GPS antenna. So, make sure that you enter measurements for you planter distance in relation to the rear axle of the tractor and NOT the GPS antenna on the roof.
I get GPS from the NAV one one tractor to go to a 20/20 on my planter and the other tractor NAV feeds an AgLeader for spraying. I've had good success with both. | |
|
Pro 700 and Integra
